Mold Removal Services in North McKinney, TX
Mold inspection first
We find the moisture behind the mold and give you a clear written plan.
Call now for a mold inspection +1 (512) 55-0198
Mold problems we handle
Mold removal for every part of your home
Attic, bathroom, kitchen, HVAC and wall-cavity mold in North McKinney homes. Pick a problem to see how we handle it.
Mold removal in North McKinney. We fix the moisture source so mold does not come back.
We provide mold removal and mold remediation in North McKinney, TX. If you found mold, we inspect it, find the moisture behind it, explain what we find in plain words and give you a clear written plan to fix it.
Why homeowners call us
Mold removal done the right way
We do not spray over a stain and leave. Every job starts with moisture readings and ends with a check of our work.
- A written scope with photos and moisture readings, not a verbal guess
- Texas rules followed, with separate licensed parties on larger jobs
- The moisture source fixed in our plan, so mold is less likely to return
- Post-remediation verification before we call the job finished
- Honest cost factors first, no fixed price on the phone
Warning signs
Signs you may need mold removal
Mold also hides inside wall cavities, under carpet padding, behind cabinets and in air ducts. If you smell it but cannot see it, call us. We measure, we do not guess.
01
Musty odor
A mold smell that stays after cleaning, often near closets, sinks or the HVAC return.
02
Visible spots
Dark green, gray or black growth on walls, ceilings, grout or baseboards.
03
Damaged surfaces
Peeling paint, bubbling drywall, warped wood or a soft subfloor.
04
Allergy symptoms
Allergy or asthma symptoms at home that ease when you leave.
05
Past water damage
A past leak, slab leak, flood or roof leak in the same area.
06
Hidden moisture
High humidity, condensation on windows or a sweating A/C system.
Local causes
Why mold grows in North McKinney homes
Most homes here sit on slab foundations, with water heaters and supply lines in the attic. Spring storms bring heavy rain and hail that damage roofing and flashing. Hard January freezes split pipes, and the damage may only show when it warms up. Summer humidity and a sweating A/C system add more moisture.
In Collin County attics, soffit vents often get blocked by insulation, and some older homes have bathroom fans venting into the attic. Wet materials that stay damp for more than 24 to 48 hours give mold what it needs to grow, a timeframe in EPA mold guidance.
- Slow leaks behind walls and under sinks
- Water heater, washer, dishwasher and fridge lines
- Blocked soffit vents and attic fans
- Roof leaks and damaged flashing
Know your mold
Common molds we find indoors
Indoor mold is usually a mix of species. Color does not tell you the species or the risk. Any mold growing indoors should be removed and its moisture source fixed.
Cladosporium
Common on painted walls, window frames and fabrics. Green to black.
Aspergillus
Often found in dusty attics, HVAC systems and on damp drywall.
Penicillium
Blue-green growth on water-damaged materials and carpet padding.
Stachybotrys
Often called black mold. Grows after long-term water damage on drywall.
Mold problems we handle
Mold removal for every part of your home
Attic mold removal
Caused by roof leaks, blocked soffit vents and bathroom fans venting into the attic. We contain the area, HEPA vacuum the roof decking, dry it and check ventilation.
Bathroom & kitchen mold
Caused by plumbing and appliance leaks and poor exhaust. We check behind cabinets, under sinks, around tubs and behind the dishwasher and fridge, not just the visible spots.
HVAC, air duct & wall mold
Caused by drain pan overflow, sweating ducts and leaks inside wall cavities. We find it with moisture meters, infrared cameras and air sampling where it helps.
Our process
How we remove mold
We follow the same six steps on every job, in line with the IICRC S520 standard for professional mold remediation. Skipping a step is how mold comes back.
01
Inspect & map moisture
Visible growth, hidden moisture, photos, readings and a written scope.
02
Contain the area
Polyethylene sheeting, negative air pressure and HEPA air scrubbers stop spores spreading. Our crew wears PPE in line with OSHA practice.
03
Remove
Moldy drywall, insulation and carpet padding are bagged and removed. Non-porous surfaces are cleaned.
04
Dry
Air movers and dehumidifiers dry the structure to normal moisture readings.
05
Clean & treat
HEPA vacuuming, damp wiping and EPA-registered antimicrobial products.
06
Verify
Readings again after drying. On larger Texas jobs, a separate licensed assessor confirms clearance.
Found mold in your North McKinney home?
Talk to a local mold specialist today. We inspect, map the moisture and give you a written plan.
Know the difference
Mold removal vs mold remediation
| Mold removal | Mold remediation |
|---|---|
| Cleans visible mold from surfaces | Covers the full problem, from inspection to prevention |
| May miss hidden spores and the moisture source | Finds and fixes the moisture source |
| Fits small, surface-only spots | Needed for larger, hidden or repeat growth |
| Little or no documentation | Written scope, containment, drying and verification |
Removal is one step inside remediation. If the moisture source is not fixed, removal alone is often temporary, and we will tell you that before we start.
Texas mold rules
How we follow TDLR mold rules
Mold work in Texas is regulated by the Texas Department of Licensing and Regulation (TDLR) under the Texas Mold Assessment and Remediation Rules. When you call, we tell you which rule applies, who will assess the job and who will do the work.
Under 25 sq ft
Texas does not require a licensed remediator for a small job under 25 contiguous square feet.
25 sq ft or more
A licensed Mold Assessment Consultant writes the protocol and a separately licensed Mold Remediation Contractor does the work.
After clearance
The remediator gives you a Certificate of Mold Damage Remediation (CMDR). Keep it for insurance and resale.
IICRC certification is industry training. It is not a government licence and does not replace a TDLR licence.
Pricing
What mold removal can cost in Texas
We cannot give a fixed price without seeing your home. These are typical Texas ranges from public cost guides, not a quote.
$300 – $1,500
Simple surface removal
$500 – $1,200
Small jobs under 25 sq ft
$1,500 – $10,000+
Full remediation
$8,000 – $20,000+
Large, attic or HVAC jobs
What changes your price: size of the area, location (wall cavity, attic or HVAC), porous materials that must be replaced, leak repair, drying time, verification and rebuild work. A low fixed price on the phone often leaves out containment, drying or verification.
Found mold?
What to do first, and what not to do
Do this
- Take photos of the area
- Note any recent leak, flood or roof problem
- Keep the area closed off
- Keep indoor humidity at 30 to 50 percent
- Call for an inspection
Do not do this
- Disturb a large area of mold
- Rely on bleach on drywall
- Paint over mold
- Run a regular vacuum over it
- Run the HVAC if ducts are moldy
Health and indoor air quality
Mold spores can trigger allergy and asthma symptoms and irritate the eyes, nose and throat. The risk is higher for young children, older adults and anyone with a lung condition. If anyone has symptoms, please also talk to a doctor.
Your belongings
Glass, metal and sealed plastic can usually be cleaned. Mattresses, upholstered furniture, cardboard and papers may need special cleaning or replacement. We tell you which is which before we start.
Prevention after our job
- Fix leaks fast
- Vent bath fans outside
- Check A/C drain pans
- Clear soffit vents
- Use a hygrometer
Local service area
Mold removal across North McKinney
We serve homeowners in North McKinney ZIP codes 75069, 75070 and 75071, plus 75072 across McKinney. Not sure if we cover your street? Call us and we will confirm.
75069750707507175072Historic DowntownStonebridge RanchCraig RanchTucker HillTrinity FallsEldoradoAdriatica VillageTowne LakeErwin Park area
We follow the IICRC S520 standard and Texas TDLR mold rules, and we fix the moisture source, not just the stain.
01
Inspect and map moisture
Photos, moisture readings and a written scope.
02
Verify before we finish
Readings after drying, plus clearance on larger jobs.
Found mold in your North McKinney home?
Do not wait for it to spread. Call us for an inspection, a clear plan and a fix for the moisture source.
Mold removal FAQs
Frequently asked questions
Answers to the questions North McKinney homeowners ask us most about mold.